Radiant & Hydronics

RSS

Primary/secondary piping is a way to achieve hydraulic separation by connecting multiple hydronic circuits with their own circulators to prevent interference. Using a pair of closely spaced tees is a common method to achieve this.

In 1988, Holland, Michigan’s downtown needed revitalization. Merchants were leaving for a nearby indoor mall. Local industrialist Ed Prince proposed installing a snow-melt system for the streets and sidewalks after seeing a similar system in Europe.

Boiler systems are essential for residential heating and hot water. Their efficiency and longevity depend on good water quality. Poor water quality causes corrosion, scale buildup, and higher costs. Maintaining high water quality ensures smooth operation and durability.

The Agnews Campus in the Santa Clara Unified School District worked with LPA Design Studios, a California-based integrated architectural and engineering design firm, to design the schools with a high-tech aesthetic.

Matt Millard, owner of Performance Mechanical in Edgartown, Massachusetts, loves to experiment with new technologies. Recently, Millard wanted to step up to hydronic radiant heating for his own home addition using an air-to-water heat pump.

As plumbers, you understand the crucial role backwater valves play in maintaining plumbing system integrity, preventing sewage backups that can cause costly repairs and health risks. A backwater valve is a specialized device allowing wastewater to flow in one direction while blocking reverse flow, acting as a strong defense to ensure wastewater moves only in the intended direction.

Circulating ground-temperature water in a Thermal Energy Network (TEN) provides efficient heating and cooling, reducing costs and mitigating climate change through decarbonization. The water must be kept within a specific temperature range, known as the performance zone.

Invariably, new technologies are emerging to solve age-old risks associated with water supply and sprinkler system backflow devices.

In a radiant heating and cooling system, water circulates through PEX pipes in the concrete slab to control the slab's temperature for heating or cooling.

Due to its low efficiency and high emissions, an installer is asked to replace the outdoor wood-fired furnace with a new cordwood gasification boiler.