Articles by John Siegenthaler, P.E.

A schematic appeared in a manufacturer’s installation manual. It was their recommended way to install a two-zone system using zone valves.

It doesn’t have to be perfect to be effective.

Some recent discoveries about ducting.

Air-to-water heat pumps offer new opportunities for hydronic pros.

Eager to keep up with this new technology, an installer decides to install a hydraulic separator between a boiler and distribution system.

Updating an old approach using modern hardware.

The system shown was installed to provide domestic hot water to a high-end home with six bathrooms. The installer selected the largest 119-gallon indirect water heater available from his local supplier.

Sometimes the Btu just canít squeeze through.

A contractor connects an on/off water-to-water heat pump to a highly zoned radiant floor heating system.

Too little flow causes too many complaints.