• Sign In
  • Create Account
  • Sign Out
  • My Account
  • NEWS
  • PRODUCTS
  • CONTRACTORS
  • ENGINEERS
  • RADIANT & HYDRONICS
  • INSIGHTS
  • MEDIA
  • RESOURCES
  • EMAGAZINE
  • SIGN UP!
cart
facebook instagram twitter linkedin youtube
  • CONTRACTORS
  • BATH & KITCHEN PRO
  • BUSINESS MANAGEMENT
  • HIGH EFFICIENCY HOMES
  • TECHNOLOGY
  • WATER TREATMENT
  • PMC COLUMNS
  • PMC COLUMNS
  • Dave Yates: Contractor’s Corner
  • John Siegenthaler: Hydronics Workshop
  • Kenny Chapman: The Blue Collar Coach
  • Matt Michel: Service Plumbing Pros
  • Scott Secor: Heating Perceptions
  • ENGINEERS
  • CONTINUING EDUCATION
  • DECARBONIZATION | ELECTRIFICATION
  • FIRE PROTECTION
  • GEOTHERMAL | SOLAR THERMAL
  • PIPING | PLUMBING | PVF
  • PME COLUMNS
  • PME COLUMNS
  • Christoph Lohr: Strategic Plumbing Insights
  • David Dexter: Plumbing Talking Points
  • James Dipping: Engineer Viewpoints
  • John Seigenthaler: Renewable Heating Design
  • Lowell Manalo: Plumbing Essentials
  • Misty Guard: Guard on Compliance
  • RADIANT & HYDRONICS
  • RADIANT COMFORT REPORT
  • THE GLITCH & THE FIX
  • INSIGHTS
  • CODES
  • GREEN PLUMBING & MECHANICAL
  • PROJECT PROFILES
  • COLUMNS
  • SPONSOR INSIGHTS
  • COLUMNS
  • Codes Corner
  • Natalie Forster: Editorial Opinion
  • Guest Editorial
  • MEDIA
  • PODCASTS
  • VIDEOS
  • WEBINARS
  • RESOURCES
  • INDUSTRY CALENDAR
  • DIRECTORIES
  • EBOOKS
  • PM BOOKSTORE
  • CE CENTER
  • MARKET RESEARCH
  • CLASSIFIEDS
  • EMAGAZINE
  • EMAGAZINE
  • ARCHIVE ISSUES
  • CONTACT
  • ADVERTISE
  • PME EMAGAZINE ARCHIVES
search
cart
facebook instagram twitter linkedin youtube
  • Sign In
  • Create Account
  • Sign Out
  • My Account
  • NEWS
  • PRODUCTS
  • CONTRACTORS
    • BATH & KITCHEN PRO
    • BUSINESS MANAGEMENT
    • HIGH EFFICIENCY HOMES
    • TECHNOLOGY
    • WATER TREATMENT
    • PMC COLUMNS
      • Dave Yates: Contractor’s Corner
      • John Siegenthaler: Hydronics Workshop
      • Kenny Chapman: The Blue Collar Coach
      • Matt Michel: Service Plumbing Pros
      • Scott Secor: Heating Perceptions
  • ENGINEERS
    • CONTINUING EDUCATION
    • DECARBONIZATION | ELECTRIFICATION
    • FIRE PROTECTION
    • GEOTHERMAL | SOLAR THERMAL
    • PIPING | PLUMBING | PVF
    • PME COLUMNS
      • Christoph Lohr: Strategic Plumbing Insights
      • David Dexter: Plumbing Talking Points
      • James Dipping: Engineer Viewpoints
      • John Seigenthaler: Renewable Heating Design
      • Lowell Manalo: Plumbing Essentials
      • Misty Guard: Guard on Compliance
  • RADIANT & HYDRONICS
    • RADIANT COMFORT REPORT
    • THE GLITCH & THE FIX
  • INSIGHTS
    • CODES
    • GREEN PLUMBING & MECHANICAL
    • PROJECT PROFILES
    • COLUMNS
      • Codes Corner
      • Natalie Forster: Editorial Opinion
      • Guest Editorial
    • SPONSOR INSIGHTS
  • MEDIA
    • PODCASTS
    • VIDEOS
    • WEBINARS
  • RESOURCES
    • INDUSTRY CALENDAR
    • DIRECTORIES
    • EBOOKS
    • PM BOOKSTORE
    • CE CENTER
    • MARKET RESEARCH
    • CLASSIFIEDS
  • EMAGAZINE
    • EMAGAZINE
    • ARCHIVE ISSUES
    • CONTACT
    • ADVERTISE
    • PME EMAGAZINE ARCHIVES
  • SIGN UP!
Plumbing & Mechanical ContractorPM Profile

PM Profile: RIDGID’s John Ruese and Viega’s Christian Geisthoff

Partnering for efficiency, safety in pressing technology.

By Mike Miazga
RIDGID’s John Ruese (left) and Viega’s Christian Geisthoff at the AHR Expo in Chicago

RIDGID’s John Ruese (left) and Viega’s Christian Geisthoff at the AHR Expo in Chicago. Photo credit: Nadia Askar/Plumbing & Mechanical

June 14, 2018

RIDGID and Viega have enjoyed a long-standing relationship in the press fitting and tool spaces. Viega debuted new fittings in its MegaPress XL line at the 2018 AHR Expo in Chicago this January; meanwhile, RIDGID displayed its new Press Booster for black steel pipe that works in conjunction with its RP 340 press tool.

Plumbing & Mechanical caught up with RIDGID Vice President and General Manager of Global Press Connection John Ruese and Viega Vice President of Market Innovations Christian Geisthoff, who spoke on a variety of subjects, including how the companies jointly develop products, their product and tool training, and what the future holds for the relationship.

 

PM: What makes the RIDGID-Viega relationship unique?


Click here to view AHR Expo 2018 Videos.


JR: We design our products jointly, and in-person collaboration is a big part of this process. Our design engineers work together, and our product marketing and senior product management people sit together when we develop new systems and applications and bring them to market. It’s done from the ground up. From designing and testing to bringing these products to market, we work as one team with one goal. The length of our relationship is a testament to how unique our situation is. 

CG: We saw an opportunity to really revolutionize the way pipes are connected, but knew we needed a tool partner to make pressing possible. We partnered with RIDGID because they shared this vision: To innovate and make the professional plumber’s life easier. Working together, we’ve replaced something that needed a torch with a tool.

 

PM: How are both companies getting the word out to contractors about your relationship and the pressing technology?

CG: We have 150-some people in the field talking to contractors and engineers. Viega does a lot of training on the job site. We do a lot of material consultation in the field in terms of demoing and testing what materials should be used for different jobs. Our training center in New England (Nashua, New Hampshire) had 4,500 people come through it last year.

JR: Part of bringing new-to-the-world technology to the marketplace is understanding the pain points contractors have. How do we help them be more efficient and profitable in the jobs they do while at the same time assisting in the labor shortage with the training programs we have? We’ll invite Viega team members to come in and talk at our training centers, and RIDGID and Viega salespeople work together with contractors on explaining the benefits of our products.

CG: With the labor shortage, we explain to people that this pipe-joining method makes installation faster and safer, but it doesn’t take away from your competence as an installer. We are making that joint more consistent and safer, plus educating the contractor on labor savings.

 

PM: What does the addition of black pipe pressing mean to both companies?

JR: I think beyond what it means to us as a company is what it means to the contractor: We’re delivering efficiency in a way that’s never been possible before. Now a contractor can crimp up to 4-inch black pipe, which can take a long time to weld. In another part of our business, we do a lot with threading and roll grooving; this doesn’t replace that method, but it does complement it in applications where you have smaller installations.

CG: Black pipe allows us to reach into new markets and new applications.

 

PM: Where do you see the RIDGID-Viega relationship headed?

JR: We are in constant development globally, looking at new platforms and features for our tools. Adding smart connectivity is a topic that’s on our radar and something we recently integrated within our compact press tools. We want to give professionals the ability to trace how many crimps are made on a job and understand usage patterns in real time. We have a very long road map that outlines our work with Viega and its senior management on how we’ll accomplish these goals. Ultimately, we want to drive value for the professional.

CG: From a new products perspective, we will continue to look for ways to make the professional’s life on the job site more efficient and safer. We have done this together with RIDGID, and our history together is laying the foundation for what’s next. We are constantly working to improve our fittings, and RIDGID is doing the same with its tools. It doesn’t matter if it’s a RIDGID tool or a Viega fitting, the consistency, quality and innovation are there.

KEYWORDS: PEX PEX plumbing installation pipe-joining methods

Share This Story

Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!

Mike miazga 2015

Mike Miazga (former group editorial director for BNP Media’s Plumbing Group) is now the vice president of sales/membership at the American Supply Association (ASA). Supply House Times is proud to be the official publication and brand of the ASA — a relationship that spans more than a decade.

Mike’s relationship with BNP Media and the Plumbing Group continues today. He now writes a monthly ASA-focused column for Supply House Times and acts as an editorial consultant to BNP Media’s Plumbing Group.

In his 10-plus years at BNP Media, Miazga was senior editor of Plumbing & Mechanical and PM Engineer before taking over chief editor duties at Supply House Times in 2011. In addition to his role as editorial director, Miazga continued as Supply House Times chief editor and the editor of the American Supply Association’s PVF Outlook eNewsletter. He also enjoyed three stints as PM Engineer’s chief editor, holding dual roles as Supply House Times and PM Engineer chief editor on two occasions.

Miazga started his career in newspapers at the age of 19 and has more than 25 years of newsroom, management, editorial and public/media relations experience, and is a former high-school baseball and golf head varsity coach. Mike and his family are still based out of the Chicago area (with ASA Headquarters in Itasca, Illinois). You can reach Mike at PlumbingGroup89@gmail.com.

 

Recommended Content

JOIN TODAY
to unlock your recommendations.

Already have an account? Sign In

  • Worker using the Milwaukee Tool SWITCH PACK drain cleaner

    Pipeline profits: Drain cleaning, pipe inspection create opportunities

    Drain cleaning and inspection services offer lucrative...
    Plumbing News
    By: Nicole Krawcke
  • Uponor employee, Arturo Moreno

    The reinvestment in American manufacturing and training

    Plumbing & Mechanical Chief Editor Nicole Krawcke and...
    Plumbing News
    By: Nicole Krawcke and Natalie Forster
  • March 2024 Women in Plumbing hero image of woman engineer overlayed by circle of hexagon shapes with numbers from 1 to 10

    Celebrating 10 Influential Women in the Plumbing Industry

    Celebrating Women's History Month and Women in...
    Plumbing News
    By: Nicole Krawcke
Subscribe For Free!
  • eNewsletters
  • Online Registration
  • Subscription Customer Service
  • eMagazine
  • Manage My Preferences

Bell & Gossett Illustrates Path to Net-zero at AHR Expo

Bell & Gossett Illustrates Path to Net-zero at AHR Expo

NIBCO Press Solutions

NIBCO Press Solutions

IPEX celebrates grand opening of new Florida distribution center

IPEX celebrates grand opening of new Florida distribution center

AI can boost efficiency and profitability for plumbing, HVAC contractors

AI can boost efficiency and profitability for plumbing, HVAC contractors

More Videos

Sponsored Content

Sponsored Content is a special paid section where industry companies provide high quality, objective, non-commercial content around topics of interest to the Plumbing & Mechanical audience. All Sponsored Content is supplied by the advertising company and any opinions expressed in this article are those of the author and not necessarily reflect the views of Plumbing & Mechanical or its parent company, BNP Media. Interested in participating in our Sponsored Content section? Contact your local rep!

close
  • J.J. Keller CMV vehicles on road
    Sponsored byJ. J. Keller & Associates, Inc.

    The dash cam game-changer for small business safety

Popular Stories

The interior of a government building.

President Trump signs executive order promoting skilled trades and apprenticeships

Figure 1 is a sketch of the flow problems of the current plumbing system.

Hydronic heating glitch solved: Why adding a circulator won't fix primary loop flow issue

Underfloor heating installation with drain sewer hole in bathroom close up on water floor heating.

Using hydronics to leverage time-of-use electrical rates

PM BEMIS June 25 Free Webinar: Optimizing Plumbing Solutions for Single-Family, Multi-Family & Public Spaces

Events

November 13, 2024

Future Proofing MEP: Navigating the 2026 High Efficiency Water Heating Standards

Join our deep dive into DOE’s new standards so you can future-proof your MEP practice.

EARN: 0.1 ASPE CEU; 1 AIA LU/HSW; 0.1 IACET CEU*; 1 PDH

View All Submit An Event

Poll

Will business be up or down in 2025?

Do you anticipate business in 2025 to be up or down in comparison to 2024?
View Results Poll Archive

Products

The Water Came To A Stop

The Water Came To A Stop

See More Products

Download the FREE Water Conservation, Quality & Safety eBook: Plumbing Trends Increasing Safe Water Availability

Related Articles

  • RIDGID-Viega

    RIDGID-Viega relationship continues to flourish

    See More
  • David Chisolm

    PM Profile: A. O. Smith's David Chisolm and Matt Schulz

    See More
  • PM Profile: NIBCO's Steve Malm and Ashley Martin

    PM Profile: NIBCO's Steve Malm and Ashley Martin

    See More

Related Products

See More Products
  • MHH4-cover-image-301x400.jpg

    Modern Hydronic Heating and Cooling For Residential and Light Commercial Buildings, 4th Edition

See More Products
×

Keep your content unclogged with our newsletters!

Stay in the know on the latest plumbing & piping industry trends.

JOIN TODAY!
  • RESOURCES
    • Advertise
    • Contact Us
    • Directories
    • Store
    • Want More
    • Supply House Times
  • SIGN UP TODAY
    • Create Account
    • eMagazine
    • eNewsletter
    • Customer Service
    • Manage Preferences
  • SERVICES
    • Marketing Services
    • Reprints
    • Market Research
    • List Rental
    • Survey/Respondent Access
  • STAY CONNECTED
    • LinkedIn
    • Facebook
    • Instagram
    • YouTube
    • X (Twitter)
  • PRIVACY
    • PRIVACY POLICY
    • TERMS & CONDITIONS
    • DO NOT SELL MY PERSONAL INFORMATION
    • PRIVACY REQUEST
    • ACCESSIBILITY

Copyright ©2025. All Rights Reserved BNP Media.

Design, CMS, Hosting & Web Development :: ePublishing

search
cart
facebook instagram twitter linkedin youtube
  • Sign In
  • Create Account
  • Sign Out
  • My Account
  • NEWS
  • PRODUCTS
  • CONTRACTORS
    • BATH & KITCHEN PRO
    • BUSINESS MANAGEMENT
    • HIGH EFFICIENCY HOMES
    • TECHNOLOGY
    • WATER TREATMENT
    • PMC COLUMNS
      • Dave Yates: Contractor’s Corner
      • John Siegenthaler: Hydronics Workshop
      • Kenny Chapman: The Blue Collar Coach
      • Matt Michel: Service Plumbing Pros
      • Scott Secor: Heating Perceptions
  • ENGINEERS
    • CONTINUING EDUCATION
    • DECARBONIZATION | ELECTRIFICATION
    • FIRE PROTECTION
    • GEOTHERMAL | SOLAR THERMAL
    • PIPING | PLUMBING | PVF
    • PME COLUMNS
      • Christoph Lohr: Strategic Plumbing Insights
      • David Dexter: Plumbing Talking Points
      • James Dipping: Engineer Viewpoints
      • John Seigenthaler: Renewable Heating Design
      • Lowell Manalo: Plumbing Essentials
      • Misty Guard: Guard on Compliance
  • RADIANT & HYDRONICS
    • RADIANT COMFORT REPORT
    • THE GLITCH & THE FIX
  • INSIGHTS
    • CODES
    • GREEN PLUMBING & MECHANICAL
    • PROJECT PROFILES
    • COLUMNS
      • Codes Corner
      • Natalie Forster: Editorial Opinion
      • Guest Editorial
    • SPONSOR INSIGHTS
  • MEDIA
    • PODCASTS
    • VIDEOS
    • WEBINARS
  • RESOURCES
    • INDUSTRY CALENDAR
    • DIRECTORIES
    • EBOOKS
    • PM BOOKSTORE
    • CE CENTER
    • MARKET RESEARCH
    • CLASSIFIEDS
  • EMAGAZINE
    • EMAGAZINE
    • ARCHIVE ISSUES
    • CONTACT
    • ADVERTISE
    • PME EMAGAZINE ARCHIVES
  • SIGN UP!