Articles Tagged with ''heat exchanger''

These heat exchangers are designed, constructed, and tested to meet ASME Section VIII, Div. 1 requirements.

The ENCOsys system was designed with efficiency, storage and more in mind. 

Geothermal systems use HDPE tubing for closed-loop earth heat exchangers, buried several feet below the surface.

Available in Upflow and Horizontal configurations, the NPF comes in two sizes of 60,000 Btu/h and 100,000 Btu/h.

An installer is asked to add a monobloc-style air-to-water heat pump to an existing hydronic system that is supplied by a mod/con boiler.

A technician encounters a system installed in the 1980s when radiant floor heating was relatively new in North America.

A homeowner hires a heating contractor to upgrade his propane-fired cast-iron boiler to a mod/con boiler. The cast-iron boiler is only 15 years old and in good shape. 

A client asks a heating contractor to set up a floor heating system for a new 7,500 square foot machine shop.

Some renewable energy heat sources require large thermal storage tanks. Examples include systems’ biomass boilers and solar thermal collectors.

With flow rates from 50 to 7,000 gpm, PF Series heat exchangers are capable of handling a wide variety of system requirements.