Tool Tips — February 2013
Perfect Sizing for Pipe Insulation
I believe this is a low-cost, effective tool for fitting pipe insulation, either fiberglass or Armaflex-type insulation. You need a plain mitre box, the kind for cutting wood. Then take a 9-in. or 12-in. drywall taping knife and sharpen the edge on a grinder.
Insert the insulation in the mitre box and swipe the taping knife through the mitre slot, at the angle you need. You will get a perfect cut and your elbows will line up perfectly.
– Teddy Foufas
Atlantis Plumbing & Heating Corp.
Brooklyn, N.Y.
Easier Quick-to-Connect Fittings
Tired of fighting quick-to-connect fittings, especially those on 8-in. widespread faucets? I always keep plumber’s grease on all my trucks for these fittings. Just wipe some of the grease on your fittings with the O-ring and they’ll pop right on. It will save you costly mistakes, such as bending the 3/8-in. copper supplies and breaking plastic clips.
– Billy Blackburn
Blackburn Plumbing
Durant, Okla.
Sticky Notes for a Cleaner Jobsite
When you're drilling a smaller hole in dry wall or plaster and you don’t want to make a mess, take a sticky note and fold it in half. Stick the note to the wall underneath the hole and it will catch the wall dust, saving you from having to use a sweeper.
– Jeff Jaruszewicz
Longo Plumbing Co.
Erie, Pa.
Helpful Links:
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!
