In my January 2022 column, I made a broad call for improved water intelligence to offer improved building occupant health. This is nothing new to the HVAC industry, with system monitoring and control extending far beyond the mechanical room and into the most remote areas of the building

There are multiple ways to dehumidify a space — mechanical, reheat and desiccant to name a few. The biggest issue has been that conventional air conditioning units are only 10% effective at removing humidity. Until now, standard de-humidification systems were expensive to purchase and install.

You would expect water in a hospital to be safe. But, far too often, water in hospitals and other health care facilities can put patients at risk of severe illness or death.

Recently, I wrote about plumbing pipe thermal expansion and expansion fittings. Based upon feedback from some in the design community, there seems to be a feeling that more design professionals within the consulting industry need to have a better foundation to enhance their understanding of the topic.  

Hybrid systems that run on propane and solar can be tailored to a project’s unique needs, providing lower first costs and reduced ongoing energy costs and emissions.

Fresh water is an undeniably valuable and essential natural resource. But are plumbing engineers unintentionally putting building occupants are risk by implementing water conservation guidelines and equipment? What are the unseen consequences of water conservation?

A lot of things are out of your control when working on a job involving multiple trades. Whenever I design any type of system, I always go down a list of “what ifs.” The “what ifs” are scenarios that can affect the performance of a system due to an unknown. This includes actions by other trades.

Over the past 60 years, plastic piping materials have evolved from a new alternative to the material of choice for building and construction applications such as hot- and cold-water plumbing distribution, fire protection and mechanical systems like hydronics and chilled water.

Recently, there was a discussion on the ASPE Open Forum regarding, “Plumbing Pipe Thermal Expansion and Expansion Fitting.” Generally, this topic would be found within your specifications under Section 22 05 16, “Expansion Fittings and Loops for Plumbing Piping;” this topic is under-discussed, and in many cases, poorly understood by many designers and engineers.

When I first entered the trades in 1972, residential tank-style water heaters shipped with the aquastat set to approximately 140° F. Dishwashers had no need to incorporate a sanitizing cycle. Around 1977, water heater manufacturers were required to lower the aquastat temperature setting to approximately 120°, and now, dishwashers needed to incorporate a sanitizing cycle where rinse water in their reservoir was raised to 140° or higher.