Many hydronic installers look for ways to differentiate their work, to craft a specific look — maybe even a “brand” — that resonates with customers. For Fernando Lobo, owner of Fairfield, Connecticut-based 1 Call Services, that unique look begins with the raw material list he builds when sizing a boiler replacement, or new boiler install.
When designing hydronic circuits, most engineers focus on what’s necessary for that circuit to absorb thermal energy at a heat source, carry it along like a conveyor belt and drop it off at one or more heat emitters.
Government planners, taking their queues from politicians and advocacy organizations, have steered the future of energy supply away from fossil fuels and toward renewably-sourced electricity. It’s happening on every level from the feds right down to local city councils.
Hercules Boiler Solder makes strong lasting repairs on leaks in steam boilers caused by leaking joints or sand holes during installation, or older installations where corrosion, vibration or settling causes leaks and cracks.
Many legacy hydronic heating systems use a fossil fuel boiler to supply fin-tube baseboard heat emitters in some areas of a building and lower-temperature radiant panels in other areas.
Although I’ve worked with hydronic heating for four decades and designed systems around just about every possible heat source, I would be hard-pressed to predict what might be available as hydronic heat sources 25 years from now.
Water-to-water heat pumps, supplied from geothermal earth loops, represent a growing sector of the hydronic heat source market. Most current-generation models can produce water temperatures up to about 125° F, perhaps a little higher if you’re willing to push the compressor operating envelope.
District systems, which have been around for centuries, provide buildings with a product created with technology beyond what an individual can either afford or apply. The primary advantage is the delivery of more cost-effective heating or cooling to the building.
The Glycol Make-up Unit GF60 (GMU) automated 110V diaphragm pump with digital control is designed to maintain critical minimum pressure levels to make up for losses that may occur due to leakage.