Articles Tagged with ''hydronic systems''

Last month, we started with an air-to-water heat pump for space heating and added an auxiliary heat source and chilled water cooling. This month, we’re adding domestic water heating, similar to last month’s setup.

Standardized piping layouts for air-to-water heat pumps can improve acceptance by facilitating a basic heating system that uses a monobloc heat pump with a 30% propylene glycol solution for freeze protection.

Hydronically-heated concrete floor slabs offer comfort but can be slow to warm up. A proposed solution uses a heat pump and variable-speed circulators to provide rapid heating through air handlers, ensuring quick warmth during cool days while maintaining energy efficiency.

Last week, we did a simple oil to gas steam boiler replacement. The customer (Mike) has been a family friend of my parents for more than 60 years. Mike’s grandfather built the house back in the 1920s. The home is currently occupied by Mike’s daughter and her two teenage grandchildren.

Education enhanced my earning potential. I became a more skilled technician, gained knowledge about new and emerging technologies, and became a much more valuable asset to my employers. Throughout my journey, I met numerous mentors in various aspects of the PHVAC trades and established insider contacts that proved to be invaluable.

In 1986, I installed a 1.5-ton geothermal heat pump in my home using two 500-foot horizontal HDPE earth loops. After digging a trench, I connected the loops to the pump and opted for a 2 HP swimming pool pump to fill and flush the system, as a garden hose couldn't provide the needed flow rate.

In 2024, the North American air-to-water heat pump market saw significant expansion, with nine new offerings introduced at the January AHR show by companies new to this category. By year's end, at least 18 companies either have or plan to offer these pumps in the U.S. Read the list of these companies as of mid-2024.

Air-to-water heat pumps and water-to-water geothermal heat pumps provide warm water for space heating, domestic water heating, and chilled water for cooling. Switching a hydronic heat pump system from space heating to cooling and vice versa seasonally is relatively simple. The system operating mode is changed at the thermostat or a dedicated system mode switch with heat, off, and cool settings.

I attended a conference hosted by the Building Performance Association and presented on air-to-water heat pump systems. Many professionals were interested in heat pumps, especially ductless air-to-air systems. One person mentioned the difficulty of finding qualified installers for air-to-water heat pumps and noted the higher cost compared to ductless air-to-air systems.

Flow direction is crucial in hydronic systems. Most designs have a fixed flow direction, but there are situations where reversals can occur. It's important to address these proactively to ensure smooth operations.