Franklin Electric’s FPS IGPH series of high-head grinder pumps is engineered for higher head conditions. Available in an automatic or manual version, the pumps utilize a cutter system with tight clearances for grinding at 414,000 cuts per min. The units incorporate two nonclogging impeller stages with a shut-off head of 200’. It features 16 full-load amps at mini-mum head requirements of 100’. Available in single-phase or three-phase versions, the pumps employ a 2 horsepower, 3,450 rpm motor. Franklin Electric.
Franklin Electric high-head grinder pumps
August 25, 2015