Plumbing News

RSS

This measure, supported by PMI and introduced by Senator Tom Udall (D-NM), seeks to improve U.S. water use efficiency and promote smart water systems.

InSinkerator to open Kenosha manufacturing plant.

The JM2512 also has a 200 gal. holding tank, 24 hp Honda engine with electric start and rear fold-down stabilizer jacks. The on-demand Vibra-pulse helps slide the nozzle around tight bends.

Each valve has a brass body, stem, ball and end cap with an aluminum alloy handle and zinc-plated screw. Its O-ring is made of nitrile butadiene rubber and its seat of PTFE, a synthetic fluropolymer of tetrafluoroethylene.

The line has been manufactured to comply with the federal no-lead law, which limits the amount of lead content of all products installed in potable/drinking water systems.

Place one of the extension pieces against the wall and mark where it touches the tank. Cut it to that length, then snap the extension into one of the clip fittings and hook it over the edge of the tank.

Legend Press features deeper tubing sockets and dual O-rings at each end that provide greater stability during the pressing process, assuring a proper press joint and seal. The maintenance-free ball valve has two Viton O-rings that seal the stem..

The U.S. Department of Labor has about $1.8 million in grants available through the Women in Apprenticeship and Nontraditional Occupations program, an initiative designed to recruit, train and retain women in high-skill occupations, such as advanced manufacturing, transportation, energy, construction and information technology

Effective May 1, LA-CO will contribute 25 cents from the sale of every 1/2-pint container of Slic-tite thread sealant sold until the company reaches its goal — a $10,000 donation to the Prostate Cancer Foundation.

Events take place at local wholesale locations, rep locations or local plumbing schools.