David Dexter: Plumbing Talking Points

RSS

Codes and standards are intended to provide a minimum level of protection for the public’s health, safety and welfare. And, generally, these documents accomplish that intended purpose in the urban/metropolitan areas of the United States. However, that may not be accurate when one gets into the rural or more isolated areas of the country.

Codes and standards are intended to provide a minimum level of protection of the public’s health, safety and welfare. And, generally, these documents accomplish that intended purpose in the urban/metropolitan areas of the United States. However, that may not be accurate when one gets into the rural or more isolated areas of the country.

“Governmental members” may desire a public perception of having “no vested financial interest in” the development process. But there is no requirement or mandate for them to be transparent in avoiding conflicts of interest.

Recently, the question was asked on ASPE’s Open Forum “Foundation drain pipe — plumbing responsible? Or only between civil and structural?” As originally posted, the designer did not have a Geotech report. But the structural consultant did show the piping around the top of the elevator footing and the perimeter footing for the foundation in their details.

Regulations have been a big topic over the past several years. Politicians, trying to make a public name, have been pushing for the reduction of regulations. They like to claim that these regulations are an impediment to economic growth and entry into certain professions. While some of this may have merit, one needs to “not throw out the baby with the bath water.”  

Let us get down in the dirt, or at least “backfill.” A recent discussion on ASPE Connect’s “Open Forum” was entitled “Minimum Pipe Cover when Calculating Invert Under Building Slab for PVC Sanitary.”

Recently, I wrote about plumbing pipe thermal expansion and expansion fittings. Based upon feedback from some in the design community, there seems to be a feeling that more design professionals within the consulting industry need to have a better foundation to enhance their understanding of the topic.  

Recently, there was a discussion on the ASPE Open Forum regarding, “Plumbing Pipe Thermal Expansion and Expansion Fitting.” Generally, this topic would be found within your specifications under Section 22 05 16, “Expansion Fittings and Loops for Plumbing Piping;” this topic is under-discussed, and in many cases, poorly understood by many designers and engineers.