AHRI Warns Consumers Against Modifying Gas-Fired Appliances
The Air-Conditioning, Heating and Refrigeration Institute warns
consumers about the dangers of unauthorized and unapproved altering or any
gas-fired heating appliance. Manufacturers must use specific engineering and
design knowledge to develop gas-fired heating appliances that operate safely
and properly under a variety of conditions.
The product designs are tested and certified by third-party independent testing agencies, like CSA International, ETL/Intertek and Underwriters Laboratories, for compliance with nationally recognized voluntary consensus safety standards. Any unauthorized modification to a gas-fired appliance, no matter how minor, can alter the design and compromise the safety of that unit.
For example, an alteration that changes the combustion process may cause carbon monoxide (CO) emissions that exceed the limits specified in the safety standards. Modifications should only be made that are authorized by the original equipment manufacturer (OEM) or other recognized authority and performed by qualified service personnel.
Consumers should also beware of companies that offer to make, or instruct consumers about how to make, modifications to various appliances without expressed, written authorization of the OEM. Always check with the OEM or their local representative to ensure that a modification is authorized.
“Any unauthorized modification to a gas-burning appliance voids its safety certification and may expose consumers to a risk of property damage, personal injury or even death,” said AHRI Chief Technical Advisor Frank A. Stanonik. “AHRI is committed to providing consumers with information on the proper installation and safe and efficient use of gas-fired appliances,” Stanonik said.
Source: AHRI
The product designs are tested and certified by third-party independent testing agencies, like CSA International, ETL/Intertek and Underwriters Laboratories, for compliance with nationally recognized voluntary consensus safety standards. Any unauthorized modification to a gas-fired appliance, no matter how minor, can alter the design and compromise the safety of that unit.
For example, an alteration that changes the combustion process may cause carbon monoxide (CO) emissions that exceed the limits specified in the safety standards. Modifications should only be made that are authorized by the original equipment manufacturer (OEM) or other recognized authority and performed by qualified service personnel.
Consumers should also beware of companies that offer to make, or instruct consumers about how to make, modifications to various appliances without expressed, written authorization of the OEM. Always check with the OEM or their local representative to ensure that a modification is authorized.
“Any unauthorized modification to a gas-burning appliance voids its safety certification and may expose consumers to a risk of property damage, personal injury or even death,” said AHRI Chief Technical Advisor Frank A. Stanonik. “AHRI is committed to providing consumers with information on the proper installation and safe and efficient use of gas-fired appliances,” Stanonik said.
Source: AHRI
Links
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!
