| 
Plumbing & Mechanical Magazine
 Home
 Subscribe
 Archives
 e-Newsletter
 Online
 Best Contractor To Work For
 Today's Top News
 Latest News
 Calendar
 Buyer's Guide
 Classifieds
 Career Search
 Product Focus
 Web Exclusive
 Blog
 How To Corner
 Current Issue
 Cover Story
 Features
 Columns
 Industry News
 News Brief
 Vendor and Supplier News
 Products
 Resources
 myPlumbing- Portal.com
 Water Info Library
 Product Info (FREE)
 Economics Week in Review
 Market Research
 AEC Store
 Radiant Flooring Guide
 Industry Links
 BNP Media Events
 Special Collections
 PM Info
 Contact Us
Search in: EditorialProductsCompanies
Email this Article Print View
Tool Tips — October 2007

October 1, 2007



Reshaping Tubing

Reshaping the end of copper tubing can be a pain when you’re in a tight spot. I use a copper male adapter with a stainless-steel nut on the threaded end. After making my cut and cleaning the tube, I put the adapter on the tube (a little manual reshaping with smooth-jawed pliers helps) and then use a ratchet wrench to spin the adapter clockwise. Now you’re ready to put your new fitting on the tube and solder away.
Bill “Paradise” Pearce
Paradise Plumbing
Ft. Worth, Texas


Wrap A Rag

Here’s a tip when snaking out drains on equipment, such as large commercial dishwashers with a long run to the floor drain. Since they often get clogged with a thick film that the snake only punches a hole through, wrap a rag around the end of the snake head and send it through. It’s easier than setting up your water jetter and it does a very thorough job!
James Brown
Watchtower Plumbing
Wallkill, N.Y.


Handy Work

When working with Phenoseal or vinyl caulk around sinks, I find it easier to apply a bead around the area that I’m working on and then use a wet cotton glove to smooth out the finish. This works well if you keep the glove wet and rinse off extra sealant as you go. It will also keep your hands clean. When done, just rinse off the glove and hang to dry. This also eliminates the cost of rags getting thrown out after one use.
Bill Greenwood
Pemlico Plumbing
Warwick, R.I.


Send Us Your Tool Tips!

If you have an idea that has saved you time and money, Plumbing & Mechanical would like to share your tip with our readers. You can e-mail your idea directly to PM editor Steve Smith at smiths@bnpmedia.com, or mail it to him c/o PM, 1050 IL Route 83, Suite 200, Bensenville, IL 60106.

PM’s Tool Tips is sponsored by Ridge Tool Co. Reader tips chosen by our editors have a chance to win a RIDGID Tool Prize Package.



Links


Did you enjoy this article? Click here to subscribe to the magazine.





BNP Media
© 2008 BNP Media. All rights reserved. | Privacy Policy