When the temperature
drops and families head indoors to escape the cold, improper use of heating
equipment can put homes at risk for fire. According to the
National Fire Protection Association, heating
equipment fires account for 18% of all reported home (second behind cooking)
and 22% of home fire deaths. Specifically, most home-heating fire deaths (79%)
and injuries (66%) and half (52%) of associated direct property damage involved
stationary or portable space heaters.
That’s
why Underwriters Laboratories warns it’s important to safeguard against potential
fire and potential home-heating hazards.
“January
and February are peak months for home-heating fire deaths,” says
John
Drengenberg, UL’s consumer safety director. “By taking precautions
and making sure you’re using indoor heating sources correctly, you can avoid
tragedy while staying warm and fire safe.”
UL
recommends these simple steps to help avoid potential home fires this winter
season:
-
Keep flammable materials at least three ft. away from indoor heat sources such
as space heaters and fireplaces.
- Always
shut off space heaters when leaving the room and before going to bed.
-
Check your home’s smoke alarms and make sure models and batteries are up to
date.
- Look
for the UL mark on home heaters to make sure they have been tested to
appropriate safety requirements.
“By
understanding where fire hazards exist, and taking some simple preventative
steps to avoid them, people can greatly reduce their risk to fire this winter,”
says
Lorraine Carli, NFPA’s vice president of
communications.
Guard against carbon monoxide
In addition to home
fires, Drengenberg reminds us that carbon monoxide also can be a hazard,
especially to toddlers and older adults. CO is a colorless, odorless and
poisonous gas that is often associated with faulty furnaces or alternative
methods of winter heating.
Dubbed the “silent killer,” the
gas kills 500 people and sends 15,200 more to the hospital each year.
To
help make your home a little bit warmer and safer, UL is urging homeowners to inspect
for, protect and detect against CO hazards and remember the following tips:
-
INSPECT for potential signs of CO leaks such as carbon streak or soot around
fuel-burning appliances.
- INSPECT
furnace rooms for moisture collecting on windows or walls.
- INSPECT
chimneys and fireplaces as well as fuel-burning appliances (furnaces, water
heaters and stoves) annually with a qualified technician.
- PROTECT
your home by purchasing and installing a CO alarm on every level of the home
and outside sleeping areas.
- PROTECT
the effectiveness of your CO alarms by testing them monthly and replacing
batteries once a year.
- DETECT
the source of CO by having a professional inspect and fix the problem after a
CO alarm sounds.
- DETECT
carbon monoxide by watching for symptoms of gas poisoning including headaches,
dizziness and other flu-like complaints If you experience those symptoms,
evacuate the house, call the fire department and seek medical attention.
For
more information on home heating and CO safety tips, go to
SafetyAtHome.com.