REED portable pipe beveler “CPB”, with battery power, quickly and safely bevels 2"-diameter and larger plastic pipe. It is the only tool in the industry that provides a safe and speedy way to bevel. CPB beveler trims small- to large-diameter plastic pipe, including pipe in the ditch. This lightweight tool significantly reduces prep time by quickly and consistently beveling when doing multiple cuts. Add bevels on most PVC glued joints and some sizes of bell and gasket joints.

Adjustable for bevel length up to 1", the required carbide Router Bits cut evenly and efficiently. Battery-powered, this beveler has no fumes! Plus, the guide plate eliminates guesswork and yields a consistent result. To eliminate damage to the gasket, a pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area. Always defer to pipe manufacturer specifications for bevel recommendations. The RPMs from the die grinder are powerful and more than sufficient to provide smooth cuts when paired with carbide router bits.

In addition to complete beveling kits, there are Beveler Adapters to fit Milwaukee®, Bosch® or DeWalt® die grinders. Beveler adapters permit temporary conversion of the die grinder to serve as a plastic pipe beveler.

Cordless portable pipe beveler adapts to trim pipe interiors, too. For instance, electrical and utility contractors deburr to make pipe interiors snag-free for running wires. To create internal bevels on plastic pipe or conduit of 2 inch inside diameter (ID) or larger, add the REED beveler shroud with guide plate, CPBIDS. Complete kits for ID beveling include the CPBIDKIT and CPBEOIDKIT.





Company Name:  Reed Manufacturing

Address:  PO Box 1321,  Erie, PA    16512

Phone: 800-666-3691; Fax: 814-455-1697

Email Address:  

Website URL: