Plumbing / Latest News / Bath & Kitchen / Water Quality

Plumbing Consortium continues to educate about upcoming lead law

The new “Reduction of Lead in Drinking Water Act” becomes effective Jan. 4, 2014.

April 11, 2013
/ Print / Reprints /
ShareMore
/ Text Size+

As the Get the Lead Out Plumbing Consortium continues its educational efforts regarding the new “Reduction of Lead in Drinking Water Act” that becomes effective Jan. 4, 2014, an industry study confirms that the outreach is necessary to prepare plumbing contractors for the new requirements. 

The recent survey by Brasscraft Manufacturing shows that a significant number of professional plumbers are not properly prepared to start complying with the new federal requirement. The new law will make it illegal to sell or install pipes, fittings and fixtures in applications that convey water for human consumption that have a weighted average lead content exceeding 0.25% (the previous national standard was 8.0% maximum).

According to the online survey conducted earlier this year, 26% of respondents admitted having no knowledge of the upcoming changes and 24% are not aware they cannot use existing (non-compliant) inventory into 2014.       

To promote understanding of and compliance with the new law, the Get the Lead Out Plumbing Consortium — a cross-section of the plumbing industry comprised of leading trade associations and manufacturers — is offering widespread education about the manufacture, distribution and installation of lead-free* plumbing products. All the facts related to the new standard, as well as time-saving training opportunities, are available via a single, comprehensive source at www.GetTheLeadOutPlumbing.com.

Plumbing distributors, engineers, contractors and code officials can use this online resource to find interpretation and enforcement issues related to the new law; information about lead-free products, basis for lead-free product selection and compliance, and material factors impacting the ability to solder lead-free alloys effectively and solder-flux considerations; upcoming training opportunities at association and industry events; and step-by-step action plans on how to prepare for the federal lead-free law.

 “The survey by BrassCraft, undertaken just after the consortium began its training and awareness efforts, certainly reflects the challenges our industry faces with the no-lead conversion in 2014,” says Cindy Sheridan, chief operating officer of the PHCC Educational Foundation and a member of the Consortium. “The time is now to start planning for this new law. Fortunately, these plumbing professionals have a go-to resource at www.GetTheLeadOutPlumbing.com. We have more work to do in educating everyone in the industry about the implications of this new law, but the Consortium is making great strides in providing information and training so that plumbing industry professionals will be properly prepared by the first of the year.”

* lead-free refers to the wetted surface of pipe, fittings and fixtures in potable water systems that have a weighted average <=0.25% per the Safe Drinking Water Act (Sec. 1417) amended 1-4-2011 and other equivalent state regulations.

 

Members of the consortium include:

American Society of Plumbing Engineers (ASPE)

American Supply Association (ASA)

International Association of Plumbing and Mechanical Officials (IAPMO)

International Code Council (ICC)

Legend Valve

Milwaukee Valve

NIBCO INC.

Plumbing Heating Cooling Contractors - National Association (PHCC)

PHCC Educational Foundation

Plumbing Manufacturers International (PMI)

Reliance Worldwide

Viega, LLC

Watts Water Technologies

 


HELPFUL LINKS:

Source: PHCC

Did you enjoy this article? Click here to subscribe to Plumbing & Mechanical. 

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

2014 Truck of the Month

PM has featured so many great plumbing service trucks! See plenty of them here in our Truck Of The Month Archives page. Are you proud of your truck? Go to our Truck of the Month page to find out how your service truck could be chosen!

8/19/14 9:00 am PDT

Free Webinar: Firestop Systems

HOLDRITE will be hosting a free webinar for Firestop Systems on Tuesday, August 19, 2014.

Plumbing and Mechanical

June 2014

2014 June

In the June issue of Plumbing & Mechanical, read about the Burke Agency and find out why they are the 2014 Plumbing & Mechanical Rep of the Year. Read about the latest method for renewable fuel, what to take into account when installing indoor climate systems and learn to be a trusted advisor with the 2015 water heater regulations. Find out who is this month's Truck of the Month, read this month's Tool Tips and check out the latest products and news from the plumbing and mechanical industry.
Table Of Contents Subscribe

Industry News Access

What’s your favorite electronic device to access industry news?
View Results Poll Archive

The Plumbing and Mechanical Store

plumbing-hvac.gif
2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Truck of the Month

Truck of the month

Are you proud of how your service truck looks? Do the graphics give people whiplash as they drive by? Have your calls increased because people remember your truck — and your company name? If so, we’d like to see it, too! Click here to find out how your service truck could be chosen as PM's Truck of the Month.

 

STAY CONNECTED

Connect to PM on Facebook Connect to PM on Twitter  Watch PM on YouTube    Connect to PM on Linked InGoogle+