Automatic Grease Interceptor
GreaseStopper® Automatic Grease Interceptors (AGI) from
Highland Tank are designed to intercept and remove large quantities of fats,
oils and grease (FOG) discharged from food service establishments and large
commercial/institutional kitchens, which might interfere with the proper
drainage and treatment of municipal wastewater. GreaseStoppers are the best
alternative to a grease trap.
www.highlandtank.com
Polyethylene Grease Traps & Interceptors
 |
| Ashland PolyTraps |
|
ASHLAND™ Polyethylene
grease traps & interceptors are designed to separate grease, oils,
fats and sediments from commercial and industrial sources. Ashland
PolyTraps™ are made of High
Density PolyEthylene (HDPE). Available
from 2.3 to 560 gallons, lightweight, cost efficient, extremely durable and
corrosion free. Designed for above- or below-ground installation. The HDPE
construction is acid resistant and solids do not easily adhere to the smooth
walls, making cleaning effortless. Call for options and information 800/541-8004.
Variable Offset Kit For Grease Duct
 |
| Metal Fab Inc. Variable Offset Kit |
|
Metal-Fab Inc. introduces a new kit to make offsets in
installations of its factory-built G Series Grease Duct. The Variable Offset
Kit provides offsets of 1.5-, 3-, 4.5- and 6 inches as an easy method to work
around beams, pillars and other obstacles on an installation site. The
innovative design allows the installer to select the amount of offset needed
with just one kit.
www.greaseduct.com
FOG Removal At The Source
 |
| The Retroceptor from Green
Turtle |
|
The Retroceptor from Green Turtle Americas is a
high-performance, beneath-the-sink grease interceptor that offers wastewater
treatment at the source for restaurants, institutions, manufacturers and other
food service industry businesses. The Retroceptor is a game-changer in the food
service industry. It dramatically increases grease removal performance,
yielding a 99.6 percent reduction in the amount of fats, oil and grease (FOG)
released into the wastewater stream. This compares to PDI-certified grease traps
that remove only 90 percent. Proven to perform at 60 ppm of free oil, it is constructed
from a corrosion-resistant and leak-proof composite to effectively handle the
high temperatures and harsh conditions of the industry.
www.greenturtletech.com
Custom-Built Separators
 |
| Rockford Separators |
|
A Rockford Separator is designed for exceptionally high
efficiency in retaining a wide variety of insoluble wastes. Maximum water
travels without turbulence through the filtering action of its screens prevents
evacuation into drainage systems, which may cause blocking, stoppages and
backups. The Rockford Separator family includes more than 26 varieties in more
than 200 sizes, engineered and custom-built for jobsite applications and
installed wherever separation systems are required.
www.rkfdseparators.com
Retrofit Skimmer & Grease Recovery Device
 |
Grease+Gard® Retrofit
Skimmer and Grease Recovery Device from Jay R. Smith Mfg. |
|
The Grease+Gard® Retrofit Skimmer and Grease Recovery Device
from Jay R. Smith Mfg. use patent-pending technology that automatically removes
FOG from the interceptor before it becomes a problem. It has a belt and heater
assembly that is controlled by a 24-hour timer. Upon a given schedule, the
heater warms up the water in the interceptor and the agitator propeller helps
to liquefy the FOG to be extracted. The belt assembly picks up
the FOG that is skimmed into a trough. From there it flows into a storage
reservoir.
www.jrsmith.com
Fire Barrier Duct Wrap
3M
Co introduces 3M™ Fire Barrier Duct Wrap 615+, a new fire-resistant wrap that
is lighter and thinner than previous 3M offerings and meets the new ASTM E 2336
fire test requirements. Made from an advanced ceramic fiber wrapped in scrim-enforced
foil, 3M Fire Barrier Duct Wrap 615+ is a lightweight, thin-profile insulation that
provides up to two hours of fire protection for grease and air ventilation
ducts. Maintains the duct integrity and helps prevent fire from rapidly
spreading throughout a building. Supports maximum temperatures of up to 2,192°F.
www.3M.com/firestop