Plumbing & Mechanical Magazine
 Home
 Subscribe
 e-Newsletter
 MicroSites
 Archives
 PM Digital Edition
 Latest News
 Green
 Vendors & Suppliers
 New Products
 Columns
 Blogs
 Videos
 Online
 Best Contractor To Work For
 Best Looking Truck Contest
 Calendar
 Events Photo Gallery
 Tool-Tips
 Buyer's Guide
 How To Corner
 Manufacturers' Rep Locator Directory
 Classifieds
 Career Search
 Webinars
 Resources
 Current Issue
 Ad Index
 Showrooms
 Water Info Library
 Market Research
 AEC Store
 PM Special Collections
 Radiant Flooring Guide Directory
 Solar Thermal Report
 Digital Radiant Flooring Guide
 Radiant Heating Report
 Industry Links
 Subscription Customer Service
 PM Info
 Contact Us
Search in: EditorialProductsCompanies
Tool Tips ― March 2009

March 1, 2009

ARTICLE TOOLS
EmailEmailPrintPrintReprintsReprintsshareShare



Shine A Light

When trying to turn off the water during a nighttime call, a small section of 3/4-inch I.D. rubber hose taped to the lower end of your curb key will come in very handy. Once you have located the water meter, you can take your Mini Mag-Lite and slide it (lens down) up and into the rubber hose. This will put light inside the water meter box and help you place the curb key on the meter cock without having to stick your hand into the meter box.

Kenny Hart
KC Hart and Co.
Virginia Beach, Va.


Two For One

I’ve used a couple of tips to help remove a round tub/shower handle. First, if you can’t get the screw in the center out with a hand tool, take your battery-operated drill with a good grip and it will come out with one shot. Second, if your handle-puller slips off the back edge, put a stainless-steel clamp right on the end and tighten it. It will come right off.

Vic Bulaich
Burko Services
Inglewood, Calif.


In A Pinch

Here’s a tip handed down to me when I was a pup repairing oil burners. I was running calls with one of the senior guys and noticed some clear nail polish in his toolbox. I guess he noticed a strange look on my face, so he filled me in (after busting my chops and telling me he gave manicures on the side).

If you ever are on a late call and do not have a replacement set of porcelains for the electrodes, take the nozzle assembly apart, clean it off good, and coat the porcelain insulator at the hole or crack with nail polish. Allow it to dry and reassemble. It will get your customer through the night or better in a pinch.

Paul Mitchell
ITAK Heating & Cooling
Howell, N.J.

RIDGID is the sponsor of Tool Tips and does not necessarily endorse the readers' submissions.


Links

|PrintEmail

Did you enjoy this article? Click here to subscribe to the magazine.



























BNP Media
© 2010 BNP Media. All rights reserved. | Privacy Policy